Bug fixes

MP3 Recording

MP3 Recording could unexpectedly stop working. To restore normal operations, a restart was needed.

Harmony Track and Latch On/Off

When any Player (Ply) track was selected as the Voice Processor's Harmony Track⁽¹⁾, and the Chord Harmony Mode was selected for the Voice Processor⁽²⁾, the Latch On/Off parameter was not turned off, and notes where still taken from the last chord played on the keyboard⁽³⁾. See the following scheme:

(1) Song Play > Preferences > Track Settings > Harmony Track --> set to any Ply track

(2) Global > Voice Processor Preset > Harmony > Harmony Mode --> set to Chord/Notes

(3) Global > Voice Processor Preset > Harmony > Latch On/Off --> set to On

Now, when the above conditions (1) and (2) are true, Latch On/Off (3) is automatically set to Off, and notes are only received fron a Player track. Latch On/Off can be set to On only when Global is selected as the Harmony Track (1).

New features

Sound Edit > DrumKit > Sample Setup

The Reverse option is now editable on RAM Drum Samples.
This function is immediately available to new samples (i.e., those created with OS version 1.10). To make it available to existing samples, you must first convert them to the new format, by using a simple procedure. Load the .SET folder containing the old samples. Go to Sampling mode. From the Record page, choose the existing sample to convert. Without any editing, choose from the page menu the Write command, and save the sample over itself. In case the sample is stereo, please donÔæâÔæ*? forget to convert both the L(eft) and R(ight) side of the sample.

Voice Processor > Setup

Low Cut control added. Cuts away pops and rumble below the selected frequency. Can be set to 60, 80 or 120 Hz.

Improvements

Global > General Controls > Interface > Background Color

The names of background colors have now been changed to numbers.

Voice Processor

Better clipping handling on the audio input signal.

Reduced noise floor when a microphone is connected to the MIC input.

Improved EQ musicality and clarity.

Improved Voice Processor Presets and Global parameters. Warning: By loading the new Musical Resources, all custom presets will be deleted. Before upgrading, save them to a storage device, then, after having loaded the new Musical Resources, load them again one at a time into the available locations.

Bug fixes

Musical Resources

The MoreMid Bass recalled a RAM Multisample.

A few Drum Kits had wrong Exclusive Group numbers assigned.

Song Play > Preferences > Track Settings

Even with the Harmony Track set to one of the Player settings, harmony notes were still received from the keyboard. This only happened when the Harmony Mode parameter (in the Global > Voice Processor Preset > Harmony page) was set to Chord.

SongBook

When assigning a Song to Player 2 from a SongBook entry, the Voice Processor Preset was changed even if locked (Global > General Controls > Lock page).

Global > Voice Processor Setup

The ÔæâÔæ*￾DryOffÔæâÔæ*￿ label was shown when the value of the Level parameter was turned to zero. This has been removed (no DryOff condition exists in Pa2X).

Global > Voice Processor Preset

After using a footswitch or an EC5 switch to turn the Delay effect off, it could not be used to turn the Delay effect on again.

Sound Edit, Style Record, Media Load and Erase

Sometimes, Styles, Pads and Performances could not be overwritten or deleted.

Sound Edit > Main

Now, physical sliders do change Realtime Control values.

Sampling

Under certain situations, after a series of Import, Load and Slice operations, the Pa2X was no longer able to boot up.